Dissolved Carbon Dioxide Sensor CO2NTROL Hamilton
Modelo: 10087810-11
Hamilton's CO?NTROL is a solid state sensor that directly measures DCO? and provides maintenance-free, real-time, online monitoring of this important critical process parameter. Get automated control that enables higher titer, better batch-to-batch reproducibility, and greater consistency from R&D to production-scale bioreactors.
Technical specifications
Length: 120mm
Parameter: DCO?
Electrical connector: VP8
Measurement principle: CO?-selective wavelength non-dispersive infrared (NDIR) absorption; temperature compensation.
Measuring range: 5 - 1000 mbar or 0.5 - 100% vol or 7.5 - 1500 mg / L in liquid phase at 101.3 kPa and 25 ? C
Accuracy at 25 ? C: ? 5 mbar (5-100 mbar); ? 5% (> 100 mbar)
Electrolyte: None
CO? consumption: None
Temperature sensor: NTC 22 kOhm
CO? configurable values: mbar, mmHg, hPa,% -vol,% -sat, ?g / l ppb, mg / l ppm (dissolved CO); Temperature: K, ? C, ? F
Diameter: 2mm
Process connection: PG13.5
Wetted Parts: Stainless Steel 1.4435 EPDM (Ethylene Propylene Elastomer) Silicone - FDA 21 CFR 177.2600 See material specification document for compliance details
Steel surface quality Ra <0.4 ?m (N5)
Digital interface: RS485 Modbus (max. 31 addresses)
Baud rate 4800, 9600, 19200, 38400, 57600,115200 bd
Operating voltage: +10 to +27 VDC
Serial number: yes
Certificate: Yes, factory test with CO? certified gas
Hygienic Design Approval EHEDG Approved. EL Class I. (Test performed with Hamilton hygienic socket REF 242545)
ATEX approval: No
IECEx approval: No
Sterilizable in autoclave: yes
CIP: yes
Steam sterilizable: Yes, max. Temperature 140 ? C
Operating temperature range: -10 to 140 ? C; sensor does not provide CO? reading above 60 ? C
Pressure range in bar: -1 to 12 bar
Protection rating: IP 68
Required flow: None
M?s informaci?n sobre este texto de origenPara obtener m?s informaci?n sobre la traducci?n, se necesita el texto de origen
Enviar comentarios
Paneles laterales
Marca: Hamilton